<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
<channel>
 <title><![CDATA[傲雪论坛]]></title>
 <link><![CDATA[http://www.aoxue.org/bbs]]></link>
 <description><![CDATA[Latest 20 article of all forums]]></description>
 <copyright><![CDATA[Copyright(C) 傲雪论坛]]></copyright>
 <generator><![CDATA[PHPWind Forums by PHPWind Studio]]></generator>
 <lastBuildDate><![CDATA[Fri, 03 Sep 2010 06:47:49 +0000]]></lastBuildDate>
  <image>
 <url><![CDATA[images//rss.gif]]></url>
 <title><![CDATA[PHPWind Board]]></title>
 <link><![CDATA[http://www.aoxue.org/bbs]]></link>
 <description><![CDATA[傲雪论坛]]></description>
  </image>
<item>
 <title><![CDATA[在workbnch中如何设置随温度变化的强度值]]></title>
 <description><![CDATA[哪位高手有Gh4500(GH500)材料的手册，想知道它的密度、随温度变化的E、热导率、线膨胀系数、强度等。
还有，在workbnch中如何设置随温度变化的强度值？]]></description>
 <link><![CDATA[http://www.aoxue.org/bbs/read.php?tid=125650]]></link>
 <author><![CDATA[ytyudazhao]]></author>
 <category><![CDATA[『 ANSYS 』]]></category>
 <pubdate><![CDATA[Fri, 03 Sep 2010 05:30:45 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[一个UDF算例与大家共享（有MSH,CAS ,,C文件）]]></title>
 <description><![CDATA[注意：他这个PDF格式里面的C程序有点错误，他的程序是：
&nbsp; begin f loop(f, thread)
F CENTROID(r,f,thread);
x = r[0];
F PROFILE(f, thread, position) = 300.+100.*sin(PI*x/0.005);
end f loop(f, thread)
应该改成：
&nbsp;begin f loop(f, thread)
&nbsp; {
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; ..]]></description>
 <link><![CDATA[http://www.aoxue.org/bbs/read.php?tid=125649]]></link>
 <author><![CDATA[kathy]]></author>
 <category><![CDATA[『 CFD基础理论 』]]></category>
 <pubdate><![CDATA[Fri, 03 Sep 2010 05:23:03 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[UDF 英文资料]]></title>
 <description><![CDATA[感觉图文都有，比其他的UDF&nbsp; 资料 好理解些]]></description>
 <link><![CDATA[http://www.aoxue.org/bbs/read.php?tid=125648]]></link>
 <author><![CDATA[kathy]]></author>
 <category><![CDATA[『 CFD基础理论 』]]></category>
 <pubdate><![CDATA[Fri, 03 Sep 2010 05:17:37 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[你能在这里找到美女吗？]]></title>
 <description><![CDATA[30秒之内找到的就是绝对高手]]></description>
 <link><![CDATA[http://www.aoxue.org/bbs/read.php?tid=125647]]></link>
 <author><![CDATA[mobei]]></author>
 <category><![CDATA[『 网事闲谈 』]]></category>
 <pubdate><![CDATA[Fri, 03 Sep 2010 02:53:01 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[fluent模拟冷却塔]]></title>
 <description><![CDATA[有没有哪位大侠用fluent模拟过冷却塔，空气和水的换热过程怎么用UDF编入程序？痛苦中]]></description>
 <link><![CDATA[http://www.aoxue.org/bbs/read.php?tid=125646]]></link>
 <author><![CDATA[温柔一刀]]></author>
 <category><![CDATA[『 Fluent专版 』]]></category>
 <pubdate><![CDATA[Fri, 03 Sep 2010 02:42:36 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[hub to casing distance]]></title>
 <description><![CDATA[在fluent中turbo中显示hub to casing distance 从0-1，这个0是在casing位置还是hub位置？]]></description>
 <link><![CDATA[http://www.aoxue.org/bbs/read.php?tid=125645]]></link>
 <author><![CDATA[uio]]></author>
 <category><![CDATA[『 Fluent专版 』]]></category>
 <pubdate><![CDATA[Fri, 03 Sep 2010 00:31:05 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[中国男篮进16强]]></title>
 <description><![CDATA[中国男篮一胜四负,居然也混到16强了,真是]]></description>
 <link><![CDATA[http://www.aoxue.org/bbs/read.php?tid=125644]]></link>
 <author><![CDATA[mobei]]></author>
 <category><![CDATA[『 网事闲谈 』]]></category>
 <pubdate><![CDATA[Fri, 03 Sep 2010 00:25:26 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[【分享】ESI_CFD_2010.0.pc-windows-nt5-x64]]></title>
 <description><![CDATA[http://u.115.com/file/f93e7674e6
ESI_CFD_2010.0.pc-windows-nt5-x86_64.part1.rar
http://u.115.com/file/f94e90216f
ESI_CFD_2010.0.pc-windows-nt5-x86_64.part2.rar
http://u.115.com/file/f98baf2f4a
ESI_CFD_2010.0.pc-windows-nt5-x86_64.part3.rar
http://u.115.com/file/f976104b09
ESI_CFD_2010.0.pc-windows ..]]></description>
 <link><![CDATA[http://www.aoxue.org/bbs/read.php?tid=125643]]></link>
 <author><![CDATA[毛头]]></author>
 <category><![CDATA[『 软件上传与下载 』]]></category>
 <pubdate><![CDATA[Fri, 03 Sep 2010 00:04:03 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[接触问题：生成了conta173和targ170单元后，如何让他们组成接触对]]></title>
 <description><![CDATA[接触问题：生成了conta173和targ170单元后，如何让他们组成接触对
esurf选择的nodes，分别生成了这些单元，用什么命令让他们组成接触对呢？
多谢！]]></description>
 <link><![CDATA[http://www.aoxue.org/bbs/read.php?tid=125642]]></link>
 <author><![CDATA[vibration]]></author>
 <category><![CDATA[『 ANSYS 』]]></category>
 <pubdate><![CDATA[Fri, 03 Sep 2010 00:01:41 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[Iphone 4用的人多么?]]></title>
 <description><![CDATA[我南方的同事包括香港的，很多人都在用了。相比于3Gs，我比较喜欢4，我喜欢方正一点的。
3G的背面的弧形，不是我喜欢的。

不知道什么时候连通有，到时候搞个套餐。。

不知道坛子里面，用的人多么？

ps，屏幕确实很清晰。。。自称是超过人肉眼的分辨率。]]></description>
 <link><![CDATA[http://www.aoxue.org/bbs/read.php?tid=125641]]></link>
 <author><![CDATA[gf99359138]]></author>
 <category><![CDATA[『 网事闲谈 』]]></category>
 <pubdate><![CDATA[Thu, 02 Sep 2010 17:03:38 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[求助：如何理解最大实体原则...]]></title>
 <description><![CDATA[最大实体原则 老是搞不太清楚，希望高手能够用通俗的语言解释一下，或者推荐个好的易懂的资料，十分感谢。]]></description>
 <link><![CDATA[http://www.aoxue.org/bbs/read.php?tid=125640]]></link>
 <author><![CDATA[zzzx188]]></author>
 <category><![CDATA[『 机械工程 』]]></category>
 <pubdate><![CDATA[Thu, 02 Sep 2010 15:37:47 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[这是个优胜劣汰的世界]]></title>
 <description><![CDATA[从天空落下的黄沙

与这个世界无关与滚动的人群无关

清洁工在收拾一个

从树上掉下的橘子

无家可归的橘子

晨光中，一只刺猬招摇过市

所有树叶开始朝一个方向聚拢


收集从西方来的风

人们把镜子藏在背后

开始赶集

我怀念 我怀念 逝去的夏天

随风飘走的碎片

我的河边有鹅卵石的睡眠

小窗边的太阳花瓣

那一层层天 ..]]></description>
 <link><![CDATA[http://www.aoxue.org/bbs/read.php?tid=125639]]></link>
 <author><![CDATA[blackbird]]></author>
 <category><![CDATA[『 网事闲谈 』]]></category>
 <pubdate><![CDATA[Thu, 02 Sep 2010 15:35:24 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[autocad建模产生的坐标问题]]></title>
 <description><![CDATA[我用CAD建模导入到icem中划分网格后，导入到fluent切面的时候输入坐标就不对了，正好是在绕x旋转方向上偏差一个90度，请问高手们这个问题怎么解决呢？]]></description>
 <link><![CDATA[http://www.aoxue.org/bbs/read.php?tid=125638]]></link>
 <author><![CDATA[afu66130]]></author>
 <category><![CDATA[『 Fluent专版 』]]></category>
 <pubdate><![CDATA[Thu, 02 Sep 2010 14:52:53 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[求助 cfx调用FORTRAN算到一步显示内存不能为READ]]></title>
 <description><![CDATA[cfx调用FORTRAN算到一步显示内存不能为READ 算自己的程序就出现这个问题 算算例HVAC时没有这个问题]]></description>
 <link><![CDATA[http://www.aoxue.org/bbs/read.php?tid=125637]]></link>
 <author><![CDATA[suyongyan]]></author>
 <category><![CDATA[『 CFX 专版 』]]></category>
 <pubdate><![CDATA[Thu, 02 Sep 2010 13:33:33 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[【分享】ESI_CFD_2010.0.pc-windows-nt5-x86]]></title>
 <description><![CDATA[http://u.115.com/file/f9dd704f98
ESI_CFD_2010.0.pc-windows-nt5-x86.part01.rar
http://u.115.com/file/f96882be80
ESI_CFD_2010.0.pc-windows-nt5-x86.part02.rar
http://u.115.com/file/f9c42f5af8
ESI_CFD_2010.0.pc-windows-nt5-x86.part03.rar
http://u.115.com/file/f9affd9197
ESI_CFD_2010.0.pc-windows-nt5-x ..]]></description>
 <link><![CDATA[http://www.aoxue.org/bbs/read.php?tid=125636]]></link>
 <author><![CDATA[毛头]]></author>
 <category><![CDATA[『 软件上传与下载 』]]></category>
 <pubdate><![CDATA[Thu, 02 Sep 2010 10:48:26 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[发一个很牛的单位转换小软件，可以自定义]]></title>
 <description><![CDATA[如题，我一直在用，很小很强大]]></description>
 <link><![CDATA[http://www.aoxue.org/bbs/read.php?tid=125635]]></link>
 <author><![CDATA[samengwu]]></author>
 <category><![CDATA[『 机械工程 』]]></category>
 <pubdate><![CDATA[Thu, 02 Sep 2010 08:05:18 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[fluent算简单的层流经常不收敛，怎么处理呢？]]></title>
 <description><![CDATA[我发现fluent的层流计算简单的case经常不收敛，而我又必须要用层流来计算。。。这个时候怎么办呢？

我的case是Kovasznay flow，是一个有精确解的数值算例：
2X2的正方形面，四面都是速度入口，速度值就是精确解的值（有公式）。
当网格数为64和100时，fluent层流一阶，二阶都收敛
当网格数为400时，fluent只有一阶收敛， ..]]></description>
 <link><![CDATA[http://www.aoxue.org/bbs/read.php?tid=125634]]></link>
 <author><![CDATA[toxshy]]></author>
 <category><![CDATA[『 Fluent专版 』]]></category>
 <pubdate><![CDATA[Thu, 02 Sep 2010 07:44:16 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[关于加载扭矩的问题]]></title>
 <description><![CDATA[现在还是用ABAQUS分析螺纹连接，我需要加载扭矩，但是老是出现错误，高手指点哈怎么加载扭矩 ，并且扭矩是加载到点上的 ，是不是加载在面上的每一个点结果都一样啊]]></description>
 <link><![CDATA[http://www.aoxue.org/bbs/read.php?tid=125633]]></link>
 <author><![CDATA[khsj820261]]></author>
 <category><![CDATA[『 ABAQUS、DIANA、ADINA及ADAMS 』]]></category>
 <pubdate><![CDATA[Thu, 02 Sep 2010 07:35:15 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[cfx与fluent的区别—使用体会]]></title>
 <description><![CDATA[我认为，cfx与fluent的区别（仅是个人观点）：
(1)fluent的前处理gambit画网格和设立边界条件比较麻烦，尤其是网格数目多的时候生成速度太慢，对机器的要求配置也较高；而cfx的前处理icem的网格生成功能强大，网格的输出格式也非常强大，支持很多不同的计算软件。
(2)fluent一般也不支持多块网格，网格导入fluent之前需要 ..]]></description>
 <link><![CDATA[http://www.aoxue.org/bbs/read.php?tid=125632]]></link>
 <author><![CDATA[ajun2100]]></author>
 <category><![CDATA[『 CFX 专版 』]]></category>
 <pubdate><![CDATA[Thu, 02 Sep 2010 07:22:15 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[非稳态直接模拟法模拟湍动]]></title>
 <description><![CDATA[有一篇文献里，作者用非稳态solver, laminar黏度模型，在低雷诺数（Re&lt;165）的情况下，模拟一个反应器内液体的流动。得到了反应器内U`U`（速度波动值的平方）值的分布。我理解这个方法，就是用非稳态直接模拟法模拟湍动。作者考察了不同雷诺数时，U`U`值的分布。当较大的U`U`值的区域所占面积较大时，作者认为这是流型 ..]]></description>
 <link><![CDATA[http://www.aoxue.org/bbs/read.php?tid=125631]]></link>
 <author><![CDATA[弗里德里希]]></author>
 <category><![CDATA[『 Fluent专版 』]]></category>
 <pubdate><![CDATA[Thu, 02 Sep 2010 06:46:10 +0000]]></pubdate>
</item>
</channel></rss>